Rust holes in the culvert floor
Water leaving the pipe erodes the base and fill.
CIPP Pipe Lining
Culvert Lining in Knoxville, TN
Renew rusting or failing culverts under roads and driveways without removing the road above.
- DiggingAccess points only
- MethodCured in place
- ResultSeamless pipe within a pipe
Culverts carry creeks, ditches and runoff under roads, driveways and railroads. Corrugated metal rusts through at the bottom, concrete cracks and joints separate, and water starts undermining the road above. Replacing a culvert can mean closing a road and rebuilding the embankment. Culvert lining restores it from inside. In hilly East Tennessee, where creeks and drainage crossings are everywhere, it is often the fastest and least disruptive repair.
We inspect the culvert, clear debris and sediment, and install a liner that fits the shape and diameter. The new smooth wall often carries water better than the old corrugated one. We coordinate with property owners, farms, HOAs and road agencies on access and timing, and we check the finished culvert on camera or by walk-through so you can see the result.
When this is the right call
Sagging road or driveway
Settling above the culvert can mean washout below.
Eroded headwalls
Erosion at the ends points to flow problems inside.
Water pooling at the inlet
Blockage or damage reduces capacity during storms.
From first call to final video
- 01
Inspect
We measure the culvert and note rust, cracks and deformation.
- 02
Clear
Sediment, debris and growth are removed.
- 03
Prepare the host
Loose rust and rough sections are addressed.
- 04
Install liner
A liner is placed and cured or grouted in place.
- 05
Verify flow
We check the finished culvert and review it with you.
Drag to compare.
Benefits that show up above ground
Road stays open
No excavation across a driveway or lane.
Better flow
A smooth liner can reduce friction.
Longer service life
A new wall protects the old shell.
Avoids washouts
Sealing prevents soil loss around the pipe.
Culvert Lining: answers
Does lining shrink the culvert opening?
A liner is thin, and its smooth interior often offsets the small loss in area. We check capacity during planning.
Can any culvert be lined?
Most can. Collapsed or severely deformed culverts may need replacement.
Do I need permits for a creek crossing?
Rules can apply. We suggest confirming with your local office, and we help prepare information.
How long does it take?
Many culverts are done in a day or two.
Often needed alongside this
Storm Drain LiningRehabilitate corroded or leaking storm drains and drainage pipes under parking lots, streets an…Explore 
Slip LiningA smaller new pipe is slid into a larger failing pipe to renew storm lines, culverts and mains.Explore 
Utility and Road BoringPrecision boring that carries pipe or conduit beneath roads, driveways, rails and obstacles.Explore 
Municipal Pipe RehabilitationTrenchless rehab of public sewer, storm and water pipes with clear scopes and documentation.Explore